Engineering

You can find guidance about the assessment and progression rules for your course below. For further information please see the University Assessment Regulations and our Results FAQs.

What Do I Need to Achieve to Pass the Year/Graduate?

Information for Undergraduate Students (Years 0, 1, 2, 3 and 4)

In order to pass this level you must:

• Pass all CORE modules (listed in your Course Handbook).
• Achieve 100 credits at pass level (40%) or above.
• Achieve a minimum of 30% in any failed non-core modules.
• Achieve an overall level average of at least 35%.

• Please note you may be awarded 60 credits of re-sits in failed modules, where a re-sit is available. If you have failures in more than 60 credits you may be offered a Repeat Level of Study.
• 10-20 credits can be compensated if you have a module mark between 30-39% in a non-core module, and all other progression criteria is met.
• If you fail 1 CORE module (with 30+) you would only be required to re-sit the CORE module, not both.
• For queries on Qualified Fails (QF), please refer to our Results FAQs.

In order to pass this level, you must:

• Achieve 120 passed credits.
• In Years 1, 2, 3 and 4 all modules are CORE for all accredited Engineering programmes and therefore, you must pass all modules .
• Achieve an overall level average of at least 35%.

For Non-Finalist students:

• Please note you may be awarded 60 credits of re-sits in failed modules, where an assessment is available. If you had failures in more than 60 credits you may be offered a Repeat Level of Study.
• For Year 2 and 3 students all supplementary assessment marks will be capped (at 40%) unless appropriate Extenuating Circumstances apply.

For Year 3 students on a 4-year MEng course:

• If you have passed 100 credits you will be allowed to take 20 credits of re-sits and remain on the MEng course.
• If you have not passed 100 credits you will be transferred onto the BEng programme and follow the finalist rules below.

In order to pass the level of study, you must:

• Achieve 120 passed credits.
• In Years 1, 2, 3, and 4 all modules are CORE for all accredited Engineering programmes and therefore, you must pass all modules .
• Achieve an overall level average of at least 35%.

For BEng and MEng Finalist students:

• If you have not met the minimum requirements to graduate with an accredited degree, you may be offered the opportunity to re-sit a maximum of 40 credits of failed modules, where re-sits are possible.
• All re-sits will take place during the August Supplementary period.
• All supplementary assessment marks will be capped unless appropriate Extenuating Circumstances apply.

Please note if you are a BSc Software Engineering student you are subject to the Science Assessment Regulations.

You must achieve the below to obtain your MEng accredited degree:

• All modules are CORE and must be passed.
• Achieve 100 credits at pass level (50%) or above.
• Achieve a minimum of 40% in any failed non-core modules.
• Achieve an overall level average of at least 35%.

• For accredited Engineering programmes all modules are CORE. Therefore, although the minimum pass criteria for the year stipulates that 100 credits must be passed, students on an accredited degree must pass all 120 credits of the modules they are enrolled on.
• The MSc Virtual Reality programme is not accredited and is therefore excluded from this.
• Finalist students who have not met the requirements to graduate with an accredited degree, may be offered the opportunity to complete a re-sit in a maximum of 40 credits of failed modules, where re-sits are possible.
• All re-sits will occur during the August Supplementary period.
• All supplementary assessment marks will be capped unless appropriate Extenuating Circumstances apply.

Please Note: There are additional criteria to be eligible for, and to remain on, Integrated Masters courses and the Year in Industry and Year Abroad programmes. You can find guidance on the criteria here.

If you have specific queries about the criteria for the Integrated Masters courses please contact the Student Experience and Information Team.

If you have specific queries about the criteria for the Year in Industry and Year Abroad programmes please contact the Faculty Employability Team.

Information for Postgraduate Students

These programmes are divided into two parts:

• For Part One you need to pass 120 credits of modules (with a mark of 50% or more). You will be allowed one opportunity to redeem any failed modules in the August 2024 Supplementary period.
• Please be aware that some modules may be non-redeemable, which means there is not a re-sit mechanism for the module. If a module is non-redeemable this will be specified in your course handbook.
• When you have passed Part One, you can proceed to Part Two, which consists of a 60 credit project/dissertation and an oral viva.

Students enrolled on September Entry Taught MSc programmes are assessed according to the non-flexible regulations.

Any supplementary attempts will be capped at 50%, unless Extenuating Circumstances have been approved.

For students completing an Aerospace Engineering or Electronic and Electrical Engineering (EEE) MSc programme, failure in 20 credits of non-CORE modules can be compensated if the overall module learning outcomes have been met. Please refer to your Course Handbook for further information on your modules.

These programmes are completed across two years.

In Year 1, 120 credits of taught modules are completed from September-June.

In Year 2, you will need to complete Part A (a 60 credit project/dissertation and an oral viva) and Part B (an Industrial Experience Module completed across the year).

You need to achieve 120 credits of passed modules (with a mark of 50% or more) in Year 1 to be able to proceed to Year 2.

You will be allowed an opportunity to redeem any failed modules in the August Supplementary period in Year 1.

Please be aware that some modules may be non-redeemable, which means there is not a re-sit mechanism for the module. If a module is non-redeemable this will be specified in your course handbook.

Any supplementary attempts will be capped at 50%, unless Extenuating Circumstances have been approved.

If you fail to pass Year 1, following the August Supplementary period then you will be transferred to the non-placement cohort of the relevant MSc programme.

For students completing an Aerospace Engineering or Electronic and Electrical Engineering (EEE) MSc programme, failure in 20 credits of non-CORE modules can be compensated if the overall module learning outcomes have been met. Please refer to your Course Handbook for further information on your modules.

You will need to complete and pass (with 50% or more):

• 60 credits of taught modules in the Spring Semester (January-June 2024).
• Your 60 credit dissertation and oral viva in the Summer Semester (June-September 2024).
• An additional 60 credits of taught modules in the Autumn Semester (September 2024 - January 2025).

You will be allowed an opportunity to redeem any failed modules during the August 2024 Supplementary period (for January-June modules) and March 2025 Supplementary period (for September-January modules).

Please be aware that some modules may be non-redeemable, which means there is not a re-sit mechanism for the module. If a module is non-redeemable this will be specified in your course handbook.

Students enrolled on January Entry Taught MSc programmes are assessed according to the flexible regulations. This means that you can work on your dissertation alongside your taught modules.

Any supplementary attempts will be capped at 50%, unless Extenuating Circumstances have been approved.

For students completing an Aerospace Engineering or Electronic and Electrical Engineering (EEE) MSc programme, failure in 20 credits of non-CORE modules can be compensated if the overall module learning outcomes have been met. Please refer to your Course Handbook for further information on your modules.

Please Note - the above guidance does not apply to the following programmes:

• MSc Sustaimable Engineering Management for International Development
• MSc Engineering Leadership Management.

Whilst these programmes follow flexible regulations, they have specific regulations and the above information will not apply for them. If you are on either of these programmes please contact your MSc Coordinator for guidance.

Modules with Specific Pass Requirements

• Some modules require you to pass the exam with 40%+ in order for the coursework element to count. This requirement would be specified in your Course Handbook if applicable to your modules.
• For these modules, if you did not achieve 40%+ in the exam you would have an EX moted alongside the coursework component and the final mark for the module will be the exam mark only.

• Some modules have component-specific pass marks. For example, in some modules you must pass each component with 40%, as well as passing the module with 40% overall.
• If you did not meet the specific component criteria for a module you would receive a QF against your mark. This means that even if you had obtained a 40% or above, if you have a QF you will be required to re-sit the component(s) where you did not meet the required criteria.
• In these cases, re-sits would be capped at component level, not module level.

How Will My Degree Be Calculated? (Undergraduate and Postgraduate)

BEng Degree Award Regulations

For the BEng Degree, your Year 2 average is given a weighting of 1 and your Year 3 average is given a weighting of 2 to give your overall weighted degree average.

Classification Boundaries: Please see the Classification of Honours Degrees guidance for a breakdown of degree classification boundaries and in-depth information.

MEng Degree Award Regulations

For the MEng Degree, your Year 2 average is given a weighting of 1, your Year 3 average is given a weighting of 2 and your Year 4 average is given a weighting of 2 to give your overall weighted degree average.

• Year 2 Average = 62.36%
• Year 3 Average = 59.43%
• Year 4 Average = 63.10%
• Weighted Degree Average = (62.36 x 1/5) + (59.43 x 2/5) + (63.10 x 2/5) = 12.47 + 23.77 + 25.24 = 61.48%

Classification Boundaries: Please see the Classification of Honours Degrees guidance for a breakdown of degree classification boundaries and in-depth information.

Taught Postgraduate Regulations (Standard and Flexible)

The overall degree classification shall be calculated based on the mean average of module marks, that are weighted according to their credit value, across the whole programme.

Preponderance and Exit-Velocity

If your weighted degree average comes to within 2% of the next degree classification boundary (called the ‘Window of Opportunity’), then the Preponderance and Exit-Velocity Principles are applied. This means you could attain a higher degree classification if you satisfy either of these principles.

Please read the following guidance on these principles.

For this principle, half of the credits that count towards your degree must be in a higher degree classification higher than your weighted degree average.

For a BEng degree, this would mean getting 120 credits at a higher degree classification across Years 2 and 3.

This example applied to the BEng:

• Year 2 = 40 credits between 50-59% (2:2) and 80 credits between 60-69% (2:1).
• Year 3 = 80 credits between 50-59% (2:2), 30 credits between 60-69% (2:1) and 10 credits at 70+% (1 st ).
• Weighted Degree Average = 58.37% (2:2)
• Final Results if Upgraded to a 2:1 due to:
  1) the weighted degree average being in the Window of Opportunity,
  2) Preponderance being satisfied – i.e. 80 credits in Year 2 plus 40 credits in Year 3 were above a 2:2 classification. That gives 120 credits at a higher degree classification than the weighted degree average.

• Weighted Degree Average = 58.37% (2:2).
• Final Year Average = 61.2% (2:1).
• Final Result = Upgraded to a 2:1 due to:
  1) the weighted degree average being in the Window of Opportunity,
  2) Exit-Velocity being satisfied (i.e. the final year average is at a higher degree classification than the weighted degree average).

MEng Considerations

The MEng year enhances and extends the work that you cover in the BEng scheme, and fulfils all of the academic requirements mandatory for those wishing to pursue and achieve Chartered Engineer (CEng status).

Transferring to the MEng

To be eligible to transfer, you will need a 55% Year 2 average.

You should request to transfer before April so that the necessary enquiries regarding CAS and visa applications can be made.

If you achieved a 55% Year 2 Average you can apply to transfer to the MEng.

Student Route visa students already in Year 3 cannot transfer to the MEng at that stage.

If you want to apply to transfer to the MEng please follow the steps on our Course Transfers page.

In the 2024/25 academic year, the deadline for Year 3 students to transfer ON or OFF the MEng programme will be 6th May 2025.

Remaining on the MEng

• In Year 2: you are required to achieve a minimum 55% level average to remain on the MEng programme. If you do not achieve this then you will be transferred onto the BEng equivalent programme.
• In Year 3: you are required to achieve a minimum 55% level average to remain on the MEng programme. If you do not achieve this then you will be transferred onto the BEng equivalent programme and be assessed under Final Year BEng regulations.

If you have any questions.

Do not hesitate to contact our Team if you want to discuss the assessment regulations for your course and what you need to achieve to pass the year. We are available in-person, via email, phone and zoom. Find our contact details here.