Form fields¶

When you create a Form class, the most important part is defining the fields of the form. Each field has custom validation logic, along with a few other hooks.

Field. clean ( value )¶

Although the primary way you’ll use Field classes is in Form classes, you can also instantiate them and use them directly to get a better idea of how they work. Each Field instance has a clean() method, which takes a single argument and either raises a django.core.exceptions.ValidationError exception or returns the clean value:

>>> from django import forms >>> f = forms.EmailField() >>> f.clean("foo@example.com") 'foo@example.com' >>> f.clean("invalid email address") Traceback (most recent call last): . ValidationError: ['Enter a valid email address.']

Core field arguments¶

Each Field class constructor takes at least these arguments. Some Field classes take additional, field-specific arguments, but the following should always be accepted:

required ¶

Field. required ¶

By default, each Field class assumes the value is required, so if you pass an empty value – either None or the empty string ( "" ) – then clean() will raise a ValidationError exception:

>>> from django import forms >>> f = forms.CharField() >>> f.clean("foo") 'foo' >>> f.clean("") Traceback (most recent call last): . ValidationError: ['This field is required.'] >>> f.clean(None) Traceback (most recent call last): . ValidationError: ['This field is required.'] >>> f.clean(" ") ' ' >>> f.clean(0) '0' >>> f.clean(True) 'True' >>> f.clean(False) 'False'

To specify that a field is not required, pass required=False to the Field constructor:

>>> f = forms.CharField(required=False) >>> f.clean("foo") 'foo' >>> f.clean("") '' >>> f.clean(None) '' >>> f.clean(0) '0' >>> f.clean(True) 'True' >>> f.clean(False) 'False'

If a Field has required=False and you pass clean() an empty value, then clean() will return a normalized empty value rather than raising ValidationError . For CharField , this will return empty_value which defaults to an empty string. For other Field classes, it might be None . (This varies from field to field.)

Widgets of required form fields have the required HTML attribute. Set the Form.use_required_attribute attribute to False to disable it. The required attribute isn’t included on forms of formsets because the browser validation may not be correct when adding and deleting formsets.

label ¶

Field. label ¶

The label argument lets you specify the “human-friendly” label for this field. This is used when the Field is displayed in a Form .

As explained in “Outputting forms as HTML” above, the default label for a Field is generated from the field name by converting all underscores to spaces and upper-casing the first letter. Specify label if that default behavior doesn’t result in an adequate label.

Here’s a full example Form that implements label for two of its fields. We’ve specified auto_id=False to simplify the output:

>>> from django import forms >>> class CommentForm(forms.Form): . name = forms.CharField(label="Your name") . url = forms.URLField(label="Your website", required=False) . comment = forms.CharField() . >>> f = CommentForm(auto_id=False) >>> print(f) Your name: Your website: Comment:

label_suffix ¶

Field. label_suffix ¶

The label_suffix argument lets you override the form’s label_suffix on a per-field basis:

>>> class ContactForm(forms.Form): . age = forms.IntegerField() . nationality = forms.CharField() . captcha_answer = forms.IntegerField(label="2 + 2", label_suffix=" =") . >>> f = ContactForm(label_suffix="?") >>> print(f) Age?Nationality?2 + 2 =

initial ¶

Field. initial ¶

The initial argument lets you specify the initial value to use when rendering this Field in an unbound Form .

To specify dynamic initial data, see the Form.initial parameter.

The use-case for this is when you want to display an “empty” form in which a field is initialized to a particular value. For example:

>>> from django import forms >>> class CommentForm(forms.Form): . name = forms.CharField(initial="Your name") . url = forms.URLField(initial="http://") . comment = forms.CharField() . >>> f = CommentForm(auto_id=False) >>> print(f) Name: Url: Comment:

You may be thinking, why not just pass a dictionary of the initial values as data when displaying the form? Well, if you do that, you’ll trigger validation, and the HTML output will include any validation errors:

This is why initial values are only displayed for unbound forms. For bound forms, the HTML output will use the bound data.

Also note that initial values are not used as “fallback” data in validation if a particular field’s value is not given. initial values are only intended for initial form display:

>>> class CommentForm(forms.Form): . name = forms.CharField(initial="Your name") . url = forms.URLField(initial="http://") . comment = forms.CharField() . >>> data = "name": "", "url": "", "comment": "Foo"> >>> f = CommentForm(data) >>> f.is_valid() False # The form does *not* fall back to using the initial values. >>> f.errors

Instead of a constant, you can also pass any callable:

>>> import datetime >>> class DateForm(forms.Form): . day = forms.DateField(initial=datetime.date.today) . >>> print(DateForm()) Day:The callable will be evaluated only when the unbound form is displayed, not when it is defined.

widget ¶

Field. widget ¶

The widget argument lets you specify a Widget class to use when rendering this Field . See Widgets for more information.

help_text ¶

Field. help_text ¶

The help_text argument lets you specify descriptive text for this Field . If you provide help_text , it will be displayed next to the Field when the Field is rendered by one of the convenience Form methods (e.g., as_ul() ).

Like the model field’s help_text , this value isn’t HTML-escaped in automatically-generated forms.

Here’s a full example Form that implements help_text for two of its fields. We’ve specified auto_id=False to simplify the output:

>>> from django import forms >>> class HelpTextContactForm(forms.Form): . subject = forms.CharField(max_length=100, help_text="100 characters max.") . message = forms.CharField() . sender = forms.EmailField(help_text="A valid email address, please.") . cc_myself = forms.BooleanField(required=False) . >>> f = HelpTextContactForm(auto_id=False) >>> print(f) Subject:  Message: Sender:  Cc myself:

When a field has help text and the widget is not rendered in a , aria-describedby is added to the to associate it to the help text:

>>> from django import forms >>> class UserForm(forms.Form): . username = forms.CharField(max_length=255, help_text="e.g., user@example.com") . >>> f = UserForm() >>> print(f) Username:

When adding a custom aria-describedby attribute, make sure to also include the id of the help_text element (if used) in the desired order. For screen reader users, descriptions will be read in their order of appearance inside aria-describedby :

>>> class UserForm(forms.Form): . username = forms.CharField( . max_length=255, . help_text="e.g., user@example.com", . widget=forms.TextInput( . attrs="aria-describedby": "custom-description id_username_helptext">, . ), . ) . >>> f = UserForm() >>> print(f["username"]) Changed in Django 5.0:

aria-describedby was added to associate help_text with its input.

error_messages ¶

Field. error_messages ¶

The error_messages argument lets you override the default messages that the field will raise. Pass in a dictionary with keys matching the error messages you want to override. For example, here is the default error message:

>>> from django import forms >>> generic = forms.CharField() >>> generic.clean("") Traceback (most recent call last): . ValidationError: ['This field is required.']

And here is a custom error message:

>>> name = forms.CharField(error_messages="required": "Please enter your name">) >>> name.clean("") Traceback (most recent call last): . ValidationError: ['Please enter your name']

In the built-in Field classes section below, each Field defines the error message keys it uses.

validators ¶

Field. validators ¶

The validators argument lets you provide a list of validation functions for this field.

See the validators documentation for more information.

localize ¶

Field. localize ¶

The localize argument enables the localization of form data input, as well as the rendered output.

See the format localization documentation for more information.

disabled ¶

Field. disabled ¶

The disabled boolean argument, when set to True , disables a form field using the disabled HTML attribute so that it won’t be editable by users. Even if a user tampers with the field’s value submitted to the server, it will be ignored in favor of the value from the form’s initial data.

template_name ¶

Field. template_name ¶ New in Django 5.0.

The template_name argument allows a custom template to be used when the field is rendered with as_field_group() . By default this value is set to "django/forms/field.html" . Can be changed per field by overriding this attribute or more generally by overriding the default template, see also Overriding built-in field templates .

Checking if the field data has changed¶

has_changed() ¶

Field. has_changed ()¶

The has_changed() method is used to determine if the field value has changed from the initial value. Returns True or False .

See the Form.has_changed() documentation for more information.

Built-in Field classes¶

Naturally, the forms library comes with a set of Field classes that represent common validation needs. This section documents each built-in field.

For each field, we describe the default widget used if you don’t specify widget . We also specify the value returned when you provide an empty value (see the section on required above to understand what that means).

BooleanField ¶

Default widget: CheckboxInput
Empty value: False
Normalizes to: A Python True or False value.
Validates that the value is True (e.g. the check box is checked) if the field has required=True .
Error message keys: required

Since all Field subclasses have required=True by default, the validation condition here is important. If you want to include a boolean in your form that can be either True or False (e.g. a checked or unchecked checkbox), you must remember to pass in required=False when creating the BooleanField .

CharField ¶

Default widget: TextInput
Empty value: Whatever you’ve given as empty_value .
Normalizes to: A string.
Uses MaxLengthValidator and MinLengthValidator if max_length and min_length are provided. Otherwise, all inputs are valid.
Error message keys: required , max_length , min_length

Has the following optional arguments for validation:

If provided, these arguments ensure that the string is at most or at least the given length.

If True (default), the value will be stripped of leading and trailing whitespace.

The value to use to represent “empty”. Defaults to an empty string.

ChoiceField ¶

Default widget: Select
Empty value: '' (an empty string)
Normalizes to: A string.
Validates that the given value exists in the list of choices.
Error message keys: required , invalid_choice

The invalid_choice error message may contain %(value)s , which will be replaced with the selected choice.

Takes one extra argument:

Either an iterable of 2-tuples to use as choices for this field, enumeration type , or a callable that returns such an iterable. This argument accepts the same formats as the choices argument to a model field. See the model field reference documentation on choices for more details. If the argument is a callable, it is evaluated each time the field’s form is initialized, in addition to during rendering. Defaults to an empty list.

This field normalizes choices to strings, so if choices are required in other data types, such as integers or booleans, consider using TypedChoiceField instead.

Changed in Django 5.0:

Support for mappings and using enumeration types directly in choices was added.

DateField ¶

Default widget: DateInput
Empty value: None
Normalizes to: A Python datetime.date object.
Validates that the given value is either a datetime.date , datetime.datetime or string formatted in a particular date format.
Error message keys: required , invalid

Takes one optional argument:

An iterable of formats used to attempt to convert a string to a valid datetime.date object.

If no input_formats argument is provided, the default input formats are taken from the active locale format DATE_INPUT_FORMATS key, or from DATE_INPUT_FORMATS if localization is disabled. See also format localization .

DateTimeField ¶

Default widget: DateTimeInput
Empty value: None
Normalizes to: A Python datetime.datetime object.
Validates that the given value is either a datetime.datetime , datetime.date or string formatted in a particular datetime format.
Error message keys: required , invalid

Takes one optional argument:

An iterable of formats used to attempt to convert a string to a valid datetime.datetime object, in addition to ISO 8601 formats.

The field always accepts strings in ISO 8601 formatted dates or similar recognized by parse_datetime() . Some examples are:

'2006-10-25 14:30:59'
'2006-10-25T14:30:59'
'2006-10-25 14:30'
'2006-10-25T14:30'
'2006-10-25T14:30Z'
'2006-10-25T14:30+02:00'
'2006-10-25'

If no input_formats argument is provided, the default input formats are taken from the active locale format DATETIME_INPUT_FORMATS and DATE_INPUT_FORMATS keys, or from DATETIME_INPUT_FORMATS and DATE_INPUT_FORMATS if localization is disabled. See also format localization .

DecimalField ¶

Default widget: NumberInput when Field.localize is False , else TextInput .
Empty value: None
Normalizes to: A Python decimal .
Validates that the given value is a decimal. Uses MaxValueValidator and MinValueValidator if max_value and min_value are provided. Uses StepValueValidator if step_size is provided. Leading and trailing whitespace is ignored.
Error message keys: required , invalid , max_value , min_value , max_digits , max_decimal_places , max_whole_digits , step_size .

The max_value and min_value error messages may contain %(limit_value)s , which will be substituted by the appropriate limit. Similarly, the max_digits , max_decimal_places and max_whole_digits error messages may contain %(max)s .

Takes five optional arguments:

These control the range of values permitted in the field, and should be given as decimal.Decimal values.

The maximum number of digits (those before the decimal point plus those after the decimal point, with leading zeros stripped) permitted in the value.

The maximum number of decimal places permitted.

Limit valid inputs to an integral multiple of step_size . If min_value is also provided, it’s added as an offset to determine if the step size matches.

DurationField ¶

Default widget: TextInput
Empty value: None
Normalizes to: A Python timedelta .
Validates that the given value is a string which can be converted into a timedelta . The value must be between datetime.timedelta.min and datetime.timedelta.max .
Error message keys: required , invalid , overflow .

Accepts any format understood by parse_duration() .

EmailField ¶

Default widget: EmailInput
Empty value: Whatever you’ve given as empty_value .
Normalizes to: A string.
Uses EmailValidator to validate that the given value is a valid email address, using a moderately complex regular expression.
Error message keys: required , invalid

Has the optional arguments max_length , min_length , and empty_value which work just as they do for CharField . The max_length argument defaults to 320 (see RFC 3696#section-3).

Changed in Django 3.2.20:

The default value for max_length was changed to 320 characters.

FileField ¶

Default widget: ClearableFileInput
Empty value: None
Normalizes to: An UploadedFile object that wraps the file content and file name into a single object.
Can validate that non-empty file data has been bound to the form.
Error message keys: required , invalid , missing , empty , max_length

Has the optional arguments for validation: max_length and allow_empty_file . If provided, these ensure that the file name is at most the given length, and that validation will succeed even if the file content is empty.

To learn more about the UploadedFile object, see the file uploads documentation .

When you use a FileField in a form, you must also remember to bind the file data to the form .

The max_length error refers to the length of the filename. In the error message for that key, %(max)d will be replaced with the maximum filename length and %(length)d will be replaced with the current filename length.

FilePathField ¶

Default widget: Select
Empty value: '' (an empty string)
Normalizes to: A string.
Validates that the selected choice exists in the list of choices.
Error message keys: required , invalid_choice

The field allows choosing from files inside a certain directory. It takes five extra arguments; only path is required:

The absolute path to the directory whose contents you want listed. This directory must exist.

If False (the default) only the direct contents of path will be offered as choices. If True , the directory will be descended into recursively and all descendants will be listed as choices.

A regular expression pattern; only files with names matching this expression will be allowed as choices.

Optional. Either True or False . Default is True . Specifies whether files in the specified location should be included. Either this or allow_folders must be True .

Optional. Either True or False . Default is False . Specifies whether folders in the specified location should be included. Either this or allow_files must be True .

FloatField ¶

Default widget: NumberInput when Field.localize is False , else TextInput .
Empty value: None
Normalizes to: A Python float.
Validates that the given value is a float. Uses MaxValueValidator and MinValueValidator if max_value and min_value are provided. Uses StepValueValidator if step_size is provided. Leading and trailing whitespace is allowed, as in Python’s float() function.
Error message keys: required , invalid , max_value , min_value , step_size .

Takes three optional arguments:

These control the range of values permitted in the field.

Limit valid inputs to an integral multiple of step_size . If min_value is also provided, it’s added as an offset to determine if the step size matches.

GenericIPAddressField ¶

class GenericIPAddressField ( ** kwargs )¶

A field containing either an IPv4 or an IPv6 address.

Default widget: TextInput
Empty value: '' (an empty string)
Normalizes to: A string. IPv6 addresses are normalized as described below.
Validates that the given value is a valid IP address.
Error message keys: required , invalid

The IPv6 address normalization follows RFC 4291#section-2.2 section 2.2, including using the IPv4 format suggested in paragraph 3 of that section, like ::ffff:192.0.2.0 . For example, 2001:0::0:01 would be normalized to 2001::1 , and ::ffff:0a0a:0a0a to ::ffff:10.10.10.10 . All characters are converted to lowercase.

Takes two optional arguments:

Limits valid inputs to the specified protocol. Accepted values are both (default), IPv4 or IPv6 . Matching is case insensitive.

Unpacks IPv4 mapped addresses like ::ffff:192.0.2.1 . If this option is enabled that address would be unpacked to 192.0.2.1 . Default is disabled. Can only be used when protocol is set to 'both' .

ImageField ¶

Default widget: ClearableFileInput
Empty value: None
Normalizes to: An UploadedFile object that wraps the file content and file name into a single object.
Validates that file data has been bound to the form. Also uses FileExtensionValidator to validate that the file extension is supported by Pillow.
Error message keys: required , invalid , missing , empty , invalid_image

Using an ImageField requires that Pillow is installed with support for the image formats you use. If you encounter a corrupt image error when you upload an image, it usually means that Pillow doesn’t understand its format. To fix this, install the appropriate library and reinstall Pillow.

When you use an ImageField on a form, you must also remember to bind the file data to the form .

After the field has been cleaned and validated, the UploadedFile object will have an additional image attribute containing the Pillow Image instance used to check if the file was a valid image. Pillow closes the underlying file descriptor after verifying an image, so while non-image data attributes, such as format , height , and width , are available, methods that access the underlying image data, such as getdata() or getpixel() , cannot be used without reopening the file. For example:

>>> from PIL import Image >>> from django import forms >>> from django.core.files.uploadedfile import SimpleUploadedFile >>> class ImageForm(forms.Form): . img = forms.ImageField() . >>> file_data = "img": SimpleUploadedFile("test.png", b"file data")> >>> form = ImageForm(<>, file_data) # Pillow closes the underlying file descriptor. >>> form.is_valid() True >>> image_field = form.cleaned_data["img"] >>> image_field.image >>> image_field.image.width 191 >>> image_field.image.height 287 >>> image_field.image.format 'PNG' >>> image_field.image.getdata() # Raises AttributeError: 'NoneType' object has no attribute 'seek'. >>> image = Image.open(image_field) >>> image.getdata()

Additionally, UploadedFile.content_type will be updated with the image’s content type if Pillow can determine it, otherwise it will be set to None .

IntegerField ¶

Default widget: NumberInput when Field.localize is False , else TextInput .
Empty value: None
Normalizes to: A Python integer.
Validates that the given value is an integer. Uses MaxValueValidator and MinValueValidator if max_value and min_value are provided. Uses StepValueValidator if step_size is provided. Leading and trailing whitespace is allowed, as in Python’s int() function.
Error message keys: required , invalid , max_value , min_value , step_size

The max_value , min_value and step_size error messages may contain %(limit_value)s , which will be substituted by the appropriate limit.

Takes three optional arguments for validation:

These control the range of values permitted in the field.

Limit valid inputs to an integral multiple of step_size . If min_value is also provided, it’s added as an offset to determine if the step size matches.

JSONField ¶

class JSONField ( encoder = None , decoder = None , ** kwargs )¶

A field which accepts JSON encoded data for a JSONField .

Default widget: Textarea
Empty value: None
Normalizes to: A Python representation of the JSON value (usually as a dict , list , or None ), depending on JSONField.decoder .
Validates that the given value is a valid JSON.
Error message keys: required , invalid

Takes two optional arguments:

A json.JSONEncoder subclass to serialize data types not supported by the standard JSON serializer (e.g. datetime.datetime or UUID ). For example, you can use the DjangoJSONEncoder class.

Defaults to json.JSONEncoder .

A json.JSONDecoder subclass to deserialize the input. Your deserialization may need to account for the fact that you can’t be certain of the input type. For example, you run the risk of returning a datetime that was actually a string that just happened to be in the same format chosen for datetime s.

The decoder can be used to validate the input. If json.JSONDecodeError is raised during the deserialization, a ValidationError will be raised.

Defaults to json.JSONDecoder .

If you use a ModelForm , the encoder and decoder from JSONField will be used.

User friendly forms

JSONField is not particularly user friendly in most cases. However, it is a useful way to format data from a client-side widget for submission to the server.

MultipleChoiceField ¶

Default widget: SelectMultiple
Empty value: [] (an empty list)
Normalizes to: A list of strings.
Validates that every value in the given list of values exists in the list of choices.
Error message keys: required , invalid_choice , invalid_list

The invalid_choice error message may contain %(value)s , which will be replaced with the selected choice.

Takes one extra required argument, choices , as for ChoiceField .

NullBooleanField ¶

Default widget: NullBooleanSelect
Empty value: None
Normalizes to: A Python True , False or None value.
Validates nothing (i.e., it never raises a ValidationError ).

NullBooleanField may be used with widgets such as Select or RadioSelect by providing the widget choices :

NullBooleanField( widget=Select( choices=[ ("", "Unknown"), (True, "Yes"), (False, "No"), ] ) )

RegexField ¶

Default widget: TextInput
Empty value: Whatever you’ve given as empty_value .
Normalizes to: A string.
Uses RegexValidator to validate that the given value matches a certain regular expression.
Error message keys: required , invalid

Takes one required argument:

A regular expression specified either as a string or a compiled regular expression object.

Also takes max_length , min_length , strip , and empty_value which work just as they do for CharField .

Defaults to False . If enabled, stripping will be applied before the regex validation.

SlugField ¶

Default widget: TextInput
Empty value: Whatever you’ve given as empty_value .
Normalizes to: A string.
Uses validate_slug or validate_unicode_slug to validate that the given value contains only letters, numbers, underscores, and hyphens.
Error messages: required , invalid

This field is intended for use in representing a model SlugField in forms.

Takes two optional parameters:

A boolean instructing the field to accept Unicode letters in addition to ASCII letters. Defaults to False .

The value to use to represent “empty”. Defaults to an empty string.

TimeField ¶

Default widget: TimeInput
Empty value: None
Normalizes to: A Python datetime.time object.
Validates that the given value is either a datetime.time or string formatted in a particular time format.
Error message keys: required , invalid

Takes one optional argument:

An iterable of formats used to attempt to convert a string to a valid datetime.time object.

If no input_formats argument is provided, the default input formats are taken from the active locale format TIME_INPUT_FORMATS key, or from TIME_INPUT_FORMATS if localization is disabled. See also format localization .

TypedChoiceField ¶

class TypedChoiceField ( ** kwargs )¶

Just like a ChoiceField , except TypedChoiceField takes two extra arguments, coerce and empty_value .

Default widget: Select
Empty value: Whatever you’ve given as empty_value .
Normalizes to: A value of the type provided by the coerce argument.
Validates that the given value exists in the list of choices and can be coerced.
Error message keys: required , invalid_choice

Takes extra arguments:

A function that takes one argument and returns a coerced value. Examples include the built-in int , float , bool and other types. Defaults to an identity function. Note that coercion happens after input validation, so it is possible to coerce to a value not present in choices .

The value to use to represent “empty.” Defaults to the empty string; None is another common choice here. Note that this value will not be coerced by the function given in the coerce argument, so choose it accordingly.

TypedMultipleChoiceField ¶

class TypedMultipleChoiceField ( ** kwargs )¶

Just like a MultipleChoiceField , except TypedMultipleChoiceField takes two extra arguments, coerce and empty_value .

Default widget: SelectMultiple
Empty value: Whatever you’ve given as empty_value
Normalizes to: A list of values of the type provided by the coerce argument.
Validates that the given values exists in the list of choices and can be coerced.
Error message keys: required , invalid_choice

The invalid_choice error message may contain %(value)s , which will be replaced with the selected choice.

Takes two extra arguments, coerce and empty_value , as for TypedChoiceField .

URLField ¶

Default widget: URLInput
Empty value: Whatever you’ve given as empty_value .
Normalizes to: A string.
Uses URLValidator to validate that the given value is a valid URL.
Error message keys: required , invalid

Has the optional arguments max_length , min_length , empty_value which work just as they do for CharField , and one more argument:

New in Django 5.0.

The scheme assumed for URLs provided without one. Defaults to "http" . For example, if assume_scheme is "https" and the provided value is "example.com" , the normalized value will be "https://example.com" .

Deprecated since version 5.0: The default value for assume_scheme will change from "http" to "https" in Django 6.0. Set FORMS_URLFIELD_ASSUME_HTTPS transitional setting to True to opt into using "https" during the Django 5.x release cycle.

UUIDField ¶

Default widget: TextInput
Empty value: None
Normalizes to: A UUID object.
Error message keys: required , invalid

This field will accept any string format accepted as the hex argument to the UUID constructor.

Slightly complex built-in Field classes¶

ComboField ¶

Default widget: TextInput
Empty value: '' (an empty string)
Normalizes to: A string.
Validates the given value against each of the fields specified as an argument to the ComboField .
Error message keys: required , invalid

Takes one extra required argument:

The list of fields that should be used to validate the field’s value (in the order in which they are provided).

>>> from django.forms import ComboField >>> f = ComboField(fields=[CharField(max_length=20), EmailField()]) >>> f.clean("test@example.com") 'test@example.com' >>> f.clean("longemailaddress@example.com") Traceback (most recent call last): . ValidationError: ['Ensure this value has at most 20 characters (it has 28).']

MultiValueField ¶

Default widget: TextInput
Empty value: '' (an empty string)
Normalizes to: the type returned by the compress method of the subclass.
Validates the given value against each of the fields specified as an argument to the MultiValueField .
Error message keys: required , invalid , incomplete

Aggregates the logic of multiple fields that together produce a single value.

This field is abstract and must be subclassed. In contrast with the single-value fields, subclasses of MultiValueField must not implement clean() but instead - implement compress() .

Takes one extra required argument:

A tuple of fields whose values are cleaned and subsequently combined into a single value. Each value of the field is cleaned by the corresponding field in fields – the first value is cleaned by the first field, the second value is cleaned by the second field, etc. Once all fields are cleaned, the list of clean values is combined into a single value by compress() .

Also takes some optional arguments:

Defaults to True , in which case a required validation error will be raised if no value is supplied for any field.

When set to False , the Field.required attribute can be set to False for individual fields to make them optional. If no value is supplied for a required field, an incomplete validation error will be raised.

A default incomplete error message can be defined on the MultiValueField subclass, or different messages can be defined on each individual field. For example:

from django.core.validators import RegexValidator class PhoneField(MultiValueField): def __init__(self, **kwargs): # Define one message for all fields. error_messages =  "incomplete": "Enter a country calling code and a phone number.", > # Or define a different message for each field. fields = ( CharField( error_messages="incomplete": "Enter a country calling code.">, validators=[ RegexValidator(r"^[0-9]+$", "Enter a valid country calling code."), ], ), CharField( error_messages="incomplete": "Enter a phone number.">, validators=[RegexValidator(r"^[0-9]+$", "Enter a valid phone number.")], ), CharField( validators=[RegexValidator(r"^[0-9]+$", "Enter a valid extension.")], required=False, ), ) super().__init__( error_messages=error_messages, fields=fields, require_all_fields=False, **kwargs )

Must be a subclass of django.forms.MultiWidget . Default value is TextInput , which probably is not very useful in this case.

Takes a list of valid values and returns a “compressed” version of those values – in a single value. For example, SplitDateTimeField is a subclass which combines a time field and a date field into a datetime object.

This method must be implemented in the subclasses.

SplitDateTimeField ¶

Default widget: SplitDateTimeWidget
Empty value: None
Normalizes to: A Python datetime.datetime object.
Validates that the given value is a datetime.datetime or string formatted in a particular datetime format.
Error message keys: required , invalid , invalid_date , invalid_time

Takes two optional arguments:

A list of formats used to attempt to convert a string to a valid datetime.date object.

If no input_date_formats argument is provided, the default input formats for DateField are used.

A list of formats used to attempt to convert a string to a valid datetime.time object.

If no input_time_formats argument is provided, the default input formats for TimeField are used.

Fields which handle relationships¶

Two fields are available for representing relationships between models: ModelChoiceField and ModelMultipleChoiceField . Both of these fields require a single queryset parameter that is used to create the choices for the field. Upon form validation, these fields will place either one model object (in the case of ModelChoiceField ) or multiple model objects (in the case of ModelMultipleChoiceField ) into the cleaned_data dictionary of the form.

For more complex uses, you can specify queryset=None when declaring the form field and then populate the queryset in the form’s __init__() method:

class FooMultipleChoiceForm(forms.Form): foo_select = forms.ModelMultipleChoiceField(queryset=None) def __init__(self, *args, **kwargs): super().__init__(*args, **kwargs) self.fields["foo_select"].queryset = .

Both ModelChoiceField and ModelMultipleChoiceField have an iterator attribute which specifies the class used to iterate over the queryset when generating choices. See Iterating relationship choices for details.

ModelChoiceField ¶

Default widget: Select
Empty value: None
Normalizes to: A model instance.
Validates that the given id exists in the queryset.
Error message keys: required , invalid_choice

The invalid_choice error message may contain %(value)s , which will be replaced with the selected choice.

Allows the selection of a single model object, suitable for representing a foreign key. Note that the default widget for ModelChoiceField becomes impractical when the number of entries increases. You should avoid using it for more than 100 items.

A single argument is required:

A QuerySet of model objects from which the choices for the field are derived and which is used to validate the user’s selection. It’s evaluated when the form is rendered.

ModelChoiceField also takes several optional arguments:

By default the widget used by ModelChoiceField will have an empty choice at the top of the list. You can change the text of this label (which is "---------" by default) with the empty_label attribute, or you can disable the empty label entirely by setting empty_label to None :

# A custom empty label field1 = forms.ModelChoiceField(queryset=. , empty_label="(Nothing)") # No empty label field2 = forms.ModelChoiceField(queryset=. , empty_label=None)

Note that no empty choice is created (regardless of the value of empty_label ) if a ModelChoiceField is required and has a default initial value, or a widget is set to RadioSelect and the blank argument is False .

This optional argument is used to specify the field to use as the value of the choices in the field’s widget. Be sure it’s a unique field for the model, otherwise the selected value could match more than one object. By default it is set to None , in which case the primary key of each object will be used. For example:

# No custom to_field_name field1 = forms.ModelChoiceField(queryset=. )

select id="id_field1" name="field1"> option value="obj1.pk">Object1option> option value="obj2.pk">Object2option> . select>

# to_field_name provided field2 = forms.ModelChoiceField(queryset=. , to_field_name="name")

select id="id_field2" name="field2"> option value="obj1.name">Object1option> option value="obj2.name">Object2option> . select>

When using the RadioSelect widget, this optional boolean argument determines whether an empty choice is created. By default, blank is False , in which case no empty choice is created.

ModelChoiceField also has the attribute:

The iterator class used to generate field choices from queryset . By default, ModelChoiceIterator .

The __str__() method of the model will be called to generate string representations of the objects for use in the field’s choices. To provide customized representations, subclass ModelChoiceField and override label_from_instance . This method will receive a model object and should return a string suitable for representing it. For example:

from django.forms import ModelChoiceField class MyModelChoiceField(ModelChoiceField): def label_from_instance(self, obj): return "My Object #%i" % obj.id

ModelMultipleChoiceField ¶

Default widget: SelectMultiple
Empty value: An empty QuerySet ( self.queryset.none() )
Normalizes to: A QuerySet of model instances.
Validates that every id in the given list of values exists in the queryset.
Error message keys: required , invalid_list , invalid_choice , invalid_pk_value

The invalid_choice message may contain %(value)s and the invalid_pk_value message may contain %(pk)s , which will be substituted by the appropriate values.

Allows the selection of one or more model objects, suitable for representing a many-to-many relation. As with ModelChoiceField , you can use label_from_instance to customize the object representations.

A single argument is required:

Takes one optional argument:

ModelMultipleChoiceField also has the attribute:

Iterating relationship choices¶

When iterated, ModelChoiceIterator yields 2-tuple choices containing ModelChoiceIteratorValue instances as the first value element in each choice. ModelChoiceIteratorValue wraps the choice value while maintaining a reference to the source model instance that can be used in custom widget implementations, for example, to add data-* attributes to elements.

For example, consider the following models:

from django.db import models class Topping(models.Model): name = models.CharField(max_length=100) price = models.DecimalField(decimal_places=2, max_digits=6) def __str__(self): return self.name class Pizza(models.Model): topping = models.ForeignKey(Topping, on_delete=models.CASCADE)

You can use a Select widget subclass to include the value of Topping.price as the HTML attribute data-price for each element:

from django import forms class ToppingSelect(forms.Select): def create_option( self, name, value, label, selected, index, subindex=None, attrs=None ): option = super().create_option( name, value, label, selected, index, subindex, attrs ) if value: option["attrs"]["data-price"] = value.instance.price return option class PizzaForm(forms.ModelForm): class Meta: model = Pizza fields = ["topping"] widgets = "topping": ToppingSelect>

This will render the Pizza.topping select as:

select id="id_topping" name="topping" required> option value="" selected>---------option> option value="1" data-price="1.50">mushroomsoption> option value="2" data-price="1.25">onionsoption> option value="3" data-price="1.75">peppersoption> option value="4" data-price="2.00">pineappleoption> select>

For more advanced usage you may subclass ModelChoiceIterator in order to customize the yielded 2-tuple choices.

ModelChoiceIterator ¶

class ModelChoiceIterator ( field )¶

The default class assigned to the iterator attribute of ModelChoiceField and ModelMultipleChoiceField . An iterable that yields 2-tuple choices from the queryset.

A single argument is required:

The instance of ModelChoiceField or ModelMultipleChoiceField to iterate and yield choices.

ModelChoiceIterator has the following method:

Yields 2-tuple choices, in the (value, label) format used by ChoiceField.choices . The first value element is a ModelChoiceIteratorValue instance.

ModelChoiceIteratorValue ¶

class ModelChoiceIteratorValue ( value , instance )¶

Two arguments are required:

The value of the choice. This value is used to render the value attribute of an HTML element.

The model instance from the queryset. The instance can be accessed in custom ChoiceWidget.create_option() implementations to adjust the rendered HTML.

ModelChoiceIteratorValue has the following method:

Return value as a string to be rendered in HTML.

Creating custom fields¶

If the built-in Field classes don’t meet your needs, you can create custom Field classes. To do this, create a subclass of django.forms.Field . Its only requirements are that it implement a clean() method and that its __init__() method accept the core arguments mentioned above ( required , label , initial , widget , help_text ).

You can also customize how a field will be accessed by overriding get_bound_field() .

Additional Information

Support Django!

Form fields
- Core field arguments
  - required
  - label
  - label_suffix
  - initial
  - widget
  - help_text
  - error_messages
  - validators
  - localize
  - disabled
  - template_name
  - has_changed()
  - BooleanField
  - CharField
  - ChoiceField
  - DateField
  - DateTimeField
  - DecimalField
  - DurationField
  - EmailField
  - FileField
  - FilePathField
  - FloatField
  - GenericIPAddressField
  - ImageField
  - IntegerField
  - JSONField
  - MultipleChoiceField
  - NullBooleanField
  - RegexField
  - SlugField
  - TimeField
  - TypedChoiceField
  - TypedMultipleChoiceField
  - URLField
  - UUIDField
  - ComboField
  - MultiValueField
  - SplitDateTimeField
  - ModelChoiceField
  - ModelMultipleChoiceField
  - Iterating relationship choices
    - ModelChoiceIterator
    - ModelChoiceIteratorValue
    Browse
    - Prev: The Forms API
    - Next: Model Form Functions
    - Table of contents
    - General Index
    - Python Module Index
    You are here:
    
    Getting help
    
    FAQ Try the FAQ — it's got answers to many common questions. Index, Module Index, or Table of Contents Handy when looking for specific information. django-users mailing list Search for information in the archives of the django-users mailing list, or post a question. #django IRC channel Ask a question in the #django IRC channel, or search the IRC logs to see if it’s been asked before. Django Discord Server Join the Django Discord Community. Official Django Forum Join the community on the Django Forum. Ticket tracker Report bugs with Django or Django documentation in our ticket tracker.
    
    Download:
    
    Offline (Django 5.0): HTML | PDF | ePub
    Provided by Read the Docs.

Form fields¶

Core field arguments¶

required ¶

label ¶

label_suffix ¶

initial ¶

widget ¶

help_text ¶

error_messages ¶

validators ¶

localize ¶

disabled ¶

template_name ¶

Checking if the field data has changed¶

has_changed() ¶

Built-in Field classes¶

BooleanField ¶

CharField ¶

ChoiceField ¶

DateField ¶

DateTimeField ¶

DecimalField ¶

DurationField ¶

EmailField ¶

FileField ¶

FilePathField ¶

FloatField ¶

GenericIPAddressField ¶

ImageField ¶

IntegerField ¶

JSONField ¶

MultipleChoiceField ¶

NullBooleanField ¶

RegexField ¶

SlugField ¶

TimeField ¶

TypedChoiceField ¶

TypedMultipleChoiceField ¶

URLField ¶

UUIDField ¶

Slightly complex built-in Field classes¶

ComboField ¶

MultiValueField ¶

SplitDateTimeField ¶

Fields which handle relationships¶

ModelChoiceField ¶

ModelMultipleChoiceField ¶

Iterating relationship choices¶

ModelChoiceIterator ¶

ModelChoiceIteratorValue ¶

Creating custom fields¶

Additional Information

Support Django!

Contents

Browse

You are here:

Getting help

Download: